Coverage (walling area) from 40 Kg Bag considering 3 mm joint thickness Assuming AAC Block length=600 mm and Depth = 200 mm

100 mm thick wall: 130 Sq Ft
200 mm thick wall: 65 Sq Ft

100 mm thick wall: 130 Sq Ft
230 mm thick wall:55 Sq Ft

150 mm thick wall:85 Sq Ft
300 mm thick wall: 45 Sq Ft

• Dust layer, if any on the surface of the blocks must be wiped.
• The Surface of blocks must be wet prior to the application i.e. Pre-wetting is required so that the block/s does not absorb moisture from Block Jointing Mortar.

Approx. 25% water (by weight of material) is required for mixing. Mixing can be done either manually or with mechanical mixer/stirrer. It is advisable to use a mechanical Mixer to get homogeneous mix. The material should be applied within 90 minutes after preparation. It is recommended to apply Jointing Mortar with a Notched Trowel that can provide minimum 3mm thick layer. Do not use sand-cement mortar for courses other than the levelling course.

No curing is required for Joints / wall after the application of Block Jointing Mortar. Natural air curing is enough. Curing of conventional levelling course bedding layer is essential for at least 3 days.

Elite Dry Mix Solutions Solid Block Jointing Mortar is delivered in 30 Kg bag. Storage life is Twelve months if the product is stored in a dry place.

Recommended to wear NIOSH approyed or equivalent particulate face mask when mixing the material. Material contains cement, which may produce allergic effect. Keep out of readof children. Avoid contact with eyes and prolonged contact with skin.

It is assumed that all standard Civil Engineering Practices shall be adopted for application of the mortar. The information given in this leaflet is for