Surface must be free of dustloose particles, grease, mould oil, rust metal, wood peels paints and plastics. Pris-weting of substrate: Surface must be dampened/moistened before the application of Plaster. Ensure there is no stagnant or frequent water fow on substrate while applying the plaster

17-19% water (by weight of thateral is required for mixing Mixing can be done either manually or with mechanical mixenstimer. It is advisable to use mechanical Mixer to get homogeneous mix. The material should be applied within hours of preparation. The Paster can be applied by hand or machine to the required thickness, Product is designed in a such way that, it can be applied even up to 20mm thick in single coat.

Natural air curing is enough. However, water mist is required under extremely hot or dry condition (at least three times a day for initial three days.
Generally, water mist can be inlated temperature levels exceeds 38°C ef Building Code Requirements for Masonry Structures (ACI530/ASCE S/TMS 402) (Ref 6 ble 1)

Elite Dry Mix Solutions Ready Mix Plaster is delivered in 40Kg bag. Storage life is twelve if the product is stored in a dry place.

• Recommend to wear NIOSH approved or equivalent particulate face mask when mixing the material.
• Materal contains cement which may produce an allergic effect.
• Keep out of reach of children.
• Material may cause initiation to eyes and skin. In case of contact with eyes, nnse immediately with plenty of water and seek medical assistance.
• Avoid contact with eyes and prolonged contact with skin.

It is assumed that all standard Civil Engineering Practices shall be adopted for application of the plaster: The information given in this leaffer is for general guidance only.